NCRD D.I.Y Stream Deck Mk2 Case Installation Instructions
-
1. String your USB-C Cable through the opening on rear of case
2. Plug USB-C into your Stream Deck MK2 and place it in rear case
3. Close case with case lid and secure it with the 4 M3x22 Screws by inserting them
through the rear of the case (you will need an allen key for this step)
*note: do no over tighten screws as they will break through the case lid (there are
multiple case lids included in case one gets damaged
4. Mount the bracket to the aluminum profile using the M8 + T-Slot nut, and then mount case to the bracket using the M6 + Nut
5. Position the case in the desired position and tighten the nut on the bottom side of the mount to prevent it from moving during use
If you have any question or need help with the installation feel free to reach out at info@ncrd.online