NCRD 5 inch DDU Install [M8 Mount]

1.  1.  Screw mount to your aluminum profile with M8 screw + T-Slot

-

2.  Attach DDU to the mount with the M6 Bolt and nut. Adjust to you desired direction and tighten screw. Next adjust height and distance and tighten
the pre-attached M6 screw on the back of DDU

 

*note: the nut should fit inside the groove of the mount as shown

4040 mount for led flagbox

3. Next connect it to your PC via the USC-C port on the bottom and proceed to
open up SimHub.

[ download SimHub here: https://www.simhubdash.com/ ]

-

4. Install Vocore driver found at https://simhubdash.com/Drivers/VOCOREScreenSetup.exe

5. In the Devices section on the left menu select "Generic Vocore Screen" and under the "Main Dashboard" tab select your dashboard of choice. It should now open when you open whichever SIM you are running.

If you need to you can rotate the screen orientation to any direction pending on how you have it mounted to your rig.

To edit the orientation under Devices select "Screen Setting" and edit the "orientation" category

Some other Dashes we recommend trying for wider range of compatibility and customization are:

-

Daniel Newman Racing

(which includes some LED profiles you can try for the RGB's)

-

Lovely Dash

If you have any question or need help with the installation feel free to reach out at info@ncrd.online

Disclaimer
All products offered on this website are aftermarket accessories intended for use with sim racing rigs and related equipment. These products are designed as add-ons and are not standalone systems.
By purchasing and using our products, you acknowledge and agree that installation, integration, and use are performed entirely at your own risk. We are not responsible for any damage, malfunction, or loss that may occur to your existing equipment, including but not limited to sim rigs, electronics, consoles, PCs, or peripherals, as a result of the installation or use of our products.
It is the responsibility of the user to ensure proper compatibility, installation, and operation in accordance with their specific setup. We strongly recommend following all provided instructions and, where necessary, seeking professional assistance.
To the fullest extent permitted by applicable law, we disclaim all liability for any direct, indirect, incidental, or consequential damages arising from the use or misuse of our products.